Shoe Quality Inspections: How to Inspect a Shoe

Shoe Quality Inspections: How to Inspect a Shoe

shoe quality Inspections B grade shoesWarning: After you learn the skills of  footwear quality control you will never look at shoes the same way again. Shoe quality inspections are a critical skill to master. Footwear construction quality is a very important feature of any shoe you may make, buy, or sell. In this article, you will learn the basic process of footwear quality control in the shoemaking industry

Knowing how to run a shoe quality inspection is a critical skill for shoe designers, developers, and product line managers.  When a new sample arrives it is critical to inspect the materials, assembly technique, and workmanship. You must know the correct footwear inspection procedure.

How to check quality of sneaker in shop?

Knowing how to inspect a shoe is also a great skill to have as a shoe buying customer in a store.  You don’t need any special tools or much time.  In just a few seconds you can quality check a new pair sneakers in a store without damaging the shoe or hassling the store employees. If you see a problem pick a diffrent pair.  Here is how to grade and inspect a shoe like a professional!

Definition of Shoe inspection quality “A”, “B”, “C” – Grades

A grade shoes:
Shoes without any functional defects or cosmetic defects that will impair the marketability of the shoe are A grade.  These are high-quality shoes, they look good and fit correctly. An A grade must follow the production specifications and match the approved confirmation sample.

B grade shoes:
Shoes without any major functional defects and which will not cause injury to the person wearing the shoes are B grade. B grade shoes may have cosmetic defects, production mistakes, or workmanship issues that cannot be properly repaired. These b grade shoes will be discounted and/or diverted to markets more tolerant of cosmetic defects.

C grade shoes:
C grade shoes have major functional defects that could cause injury to the wearer or major cosmetic defects that cannot be repaired. Shoes are also considered C-grade if they have poor workmanship or materials defects that could shorten the normal life expectancy of the shoe, or damage the companies reputation. These shoes should be destroyed.

Shoes quality checklist : How to inspect a shoe:

The main points in a shoe inspection are as follows:
#1. Is this the correct shoe, a matched pair?
#2. Is the shoe clean?
#3. Does the shoe follow the specification?
#4. Is the workmanship high quality?
#5. Is the shoe damaged in any way?

How to check quality of sneaker!

Shoe_quality_inspection_BoxedThe first step of your shoe quality inspections will be to review the shoe packaging.
Is the shoe in the correct inner box for its model?
Is the box presentable? You should inspect the box to insure it is not damaged or dirty.
Is the box the correct size? The shoe should not be crushed inside a small box.
Confirm the information on the box end label matches the shoe Color/Model/Size.
Check any hang tags to make sure they are correct for the shoe.

quality control on-site tests for shoes how to check quality of shoesRemove the shoes from the packing box.
Do you have a left and right?
Are the shoes the same size and color?
Check the shoe tongue label information –
I know this sounds crazy but in the factory, it’s not hard to put a right size 7 and a left size 7.5 into the same box.
Holding the shoe, place the pair of shoes bottom to bottom.
Check them for symmetry. Does the pair really match in length?  The size marks match but are they the same length?

Key shoe quality issue : Symmetry

Now, holding the shoe from the bottom, roll the uppers together side by side.
You are now checking the alignment of the shoe parts. Starting from the front, roll the shoes to align the parts, toe caps, vamps, overlays, eye stays, and eyelets.
While you have the uppers side by side compare finish and colors of each part.

How to inspect a shoe footwear final inspection process
from The book “How Shoes are Made”

Next, hold the shoes up looking at the heels. Make sure the shoes sit on the outsole straight. A shoe inspector checks to conform the upper is not rotated off center.

Now, rolling the heels together,  check that the back height and collar lines match.

At this point, study the shoe bottoms. Do they match? Are the color blocks in the same location? Look over the midsole sidewall for wrinkles. Check the seam joining the upper to the outsole.  Look out for any extra glue on the upper. 2mm is the limit for “over gluing.” Also look for over buffing of the upper.
On the shoe bottom check for color bleeding between color blocks.  Look for any paint covering mistakes. Check to make sure the outsole parts fit together neatly without any extra glue.

Shoe Anatomy: The Basics On Quality Footwear Construction
Shoe Anatomy: The Basics On Quality Footwear Construction

Footwear Inspection : Look inside!

Complete shoe quality inspections check each side inside and out. Now that we looked over the outside it’s time to dive inside because a great looking shoe with defects inside is not salable. Look inside the shoe opening, Is the lining clean and without wrinkles?  Run your hand around the collar, feel for any lump, bumps or glue. For leather shoes, be on the lookout for any lasting nails or staples. For sports shoes, make sure the footbed is straight, level, and fitting correctly. If the footbed is too small it may slide around, too big and the footbed may wrinkle or curl.

Next, inspect the tongue lining for wrinkles and lumps. Run your hand down inside to check the vamp and toe cap from inside. Feel around the toe along footbed for lasting wrinkles. Feel for any rough stitching inside.

Finally, make a quick check of the laces. You need to adjust the shoe laces if too long or too short, too long is much better than too short.

Common Shoe Quality Problems

Common Shoe Quality Problems how to check quality of shoes
Quality Problems from “How Shoes are Made”

When you run shoe quality inspections there are common things you should be looking for. You can call this the commen shoe quality defect list.  Is the shoe clean?  (White shoes can be hard to make inside a dirty factory.) Color matching of shoe parts, (suede and natural leathers can be tricky.) Material quality?  Is the suede hairy? Rough trimming or rough cutting. Upper wrinkles?  Check around the collar foam.

A Final Word on Shoe Quality Inspections

When inspecting, it’s critical to decide if the problems you see are a “one-off” mistake or a systematic problem that will affect every shoe? It’s very important to understand that Inside the factory the same worker competes one operation. If the vamp stitcher is having a bad day you may see lots of crooked stitching on a vamp.

Finally, when you check shoe quality inspections “inbound” inside your warehouse, you already own the problem.  Ask yourself, how did this shoe get this far?  What is the footwear final inspection process? Who missed these problems inside the factory before the shoes shipped?  Heads should be rolling! Your factory has a QC system flaw. Can you “fix” your factory?  Maybe you need to find a new one?

Footwear Quality Assurance types of leather defects

You can Learn more about shoe quality and shoe inspection procedures ! Check out Chapter 25 on Quality Control in the book How Shoes are Made. You will learn how to check quality of sole of shoe and how to inspect uppers. The book includes a footwear inspection checklist.
How Shoes are Made.

Check quality of sneakers

If you want to see a detailed quality inspection of an original Nike Air Force 1 Mid and Nike Air Max 90,
Check out these articles. You will see we have cut into the real and fake shoes to show you what quality looks like inside and out.

learn how to make shoes:

Footwear design book Free PFD Shoe Design Book Download जूते कैसे बनते हैंDo you want to learn how big brands make shoes?  Now you can!  How Shoes are Made will show you how modern shoes come to life! More than just a tour through a sneaker factory and more than your average shoe making book!  This is the perfect Shoe design a handbook for footwear designers.  From drawing shoe designs to sample development and footwear manufacturing, you will learn how it is all done. Written by veteran shoemaking pros, How Shoes are Made will give you a look inside the REAL world of shoe design, development, and mass production. This book teaches shoe making for beginners and students. 220 pages with over 400 color photos and drawings. 26 chapters explaining shoe design, footwear pattern making, sample development, footwear materials selection, upper stitching, outsole and tooling design, shoe lasts, shoe costing, quality inspections, pattern making and much more!  A must-read for young shoe designers, sneakerheads, or any footwear fanatic! Secure payments Visa, MasterCard & PayPal. Over 3500 copies sold! Read in over 60 countries!
Ready for Download Now! Edición española See Preview Video On YouTube

Download Now! 

Print Edition Now Available!  

Table of Contents:

The Design Process, Shoe Development, Shoe Patterns, Shoe Specifications, Outsole Tooling, Development Process, Pre-Production, Material Preparation, Stitching Operations, Rubber Pressing, EVA Forming, The Assembly Line, The Shoe Last, Footwear Costing, Importing Shoes, Shoe Logo Design, Leather for Shoes, Textiles for Shoes ,Synthetics for Shoes,  Foam for Shoes, Know Your Footbeds, Material Suppliers, Shoe Designers Tools, Jobs in the Shoe Trade ,Quality Control, Starting a Shoe Company, Life at a Shoe Factory, Shoe Making Dictionary

If you want to learn more, check out our new books.

Print Editions and Instant Downloads Available Now!

Shoemaking Books / Go to Shoemaking Tools

No Downloads found No Downloads found No Downloads found

Shoe Designers

No Downloads found

Start-up your Own Shoe Company

No Downloads found