How Shoe Lasts are Made

How Shoe Lasts are Made

How Shoe Lasts are Made shutterstock_111577298The shoe last is the starting point for any shoe design project and is critical to the shape and function of all types of footwear. The last is used by the shoe factory to determine the shape of the shoe. The last also determines fit, performance, ergonomics, and style of a shoe. Round toes, pointed toes, low heel, or high heels, these attributes are all determined by the shoe last. These attributes are what make different shoes suitable for running, basketball, hiking, or high fashion.

With the shoe last in hand, the pattern master creates the shoe pattern to fit the last tightly. Once the design is confirmed, the patterns are graded following the last to make each shoe size.  Shoe lasts can be made from injection molded plastic, carved wood, or cast aluminum.

last making school How shoes lasts are Made When discussing the attributes of a last you will need to know the common terms. The majority of measurements are volume rather than the traditional length and width associated with shoe fit.
Click here to see How Shoe Lasts are Measured 

Last making is an art form. A skilled last maker will have many years of experience and may have gone to last making school. When making a last, the anatomy of the foot must be considered, especially how the foot shape changes when flexing.  When a last is designed for custom shoes every dimension for the customer’s foot and the desired style must be considered.

 

Shoe Last Types:

Depending on the style of shoe that is being made the last will need some special features to allow the shoe to release the last.  The standard athletic shoe with a floating lace-up tongue can use a solid last. Loafers, Oxfords, and boots will require a last that can articulate so the shoes are not damaged during the de-lasting processes.

Solid Shoe last:  The most common type of shoe lasts, the solid last can be made of plastic, aluminum, or wood.

Hinged Shoe Last:  The hinged last is often used for making fine leather shoes. The last can adjust allowing easy removal.

Scoop Last: In the scoop last, the instep is removable allowing a cone of the shoe to be shaped.

Telescoping Last:  Used for high boots, the telescope last separates into parts allowing easy removal.

 

The Wood Shoe LastThe Wood Shoe Last

The wood shoe last can be made by copy lathe turning, CNC milling, and even hand carving.

Pros: Great for handmade, custom one-off, or bespoke shoemaking.  Easy to customize with hand tools and can be made for a specific customer. Wood surface accepts nails and tacks required for custom made shoe construction.  Perfect for the handmade high dollar shoe or the handmade fit testing last. The wood last can be made of solid, hinged, scoop, and telescope last styles.

Cons:  Wood lasts are expensive, fragile, and susceptible to warping and rot if damp. They do not agree with heat tunnels or vulcanizing ovens. Wood lasts are not acceptable for modern mass production.

plastic shoe last The Plastic  Last:

The modern plastic shoe last is made of high-density polyethylene plastic (HMW-HDPE), which allows for many tack holes before needing repair. The plastic last is made by first injecting a plastic “blank” that is roughly shaped by each size. These plastic blanks are then turned (or cut) by a computer controlled cutting machine (or lathe). In the turning process the lasts are rough cut at high speed, then moved to another machine for the final shaping cuts.  After turning, the toe and heel are trimmed with a saw then sanded into the final shape.

Pros:  The plastic shoe last is the state of the art for modern shoemaking.  Easy to reshape for fitting tests, the lasts can be machined, sanded, and filed.  Computer turned plastic lasts can be highly accurate for precision fitting.  Easy to mass produce, impervious to heat and moisture. The plastic last is the workhorse of the modern high-quality sneaker factory.  The plastic last can be made of solid, hinged, scoop, and telescoping styles.

Cons:  Plastic shoe lasts can be expensive.  They are very durable but they can be chipped, dented, and scratched if subjected to rough handling. Large sizes of plastic lasts for boots can be heavy and difficult for workers to handle. Plastic lasts cannot be used in vulcanizing ovens. They can be more expensive to recycle as they must be chipped and remelted.

Soild_Shoe_last_MetalThe Aluminum Last

Very common for shoe production, the cast aluminum last is easy to handle in large sizes. Often used for snow boots and for making wellington style rubber boots. Mass produced in rather primitive casting factories, the cast aluminum lasts are made hollow in sand casting molds.

Pros:  The cast aluminum shoe last is cheap, easy to mass produce, and impervious to heat and moisture.  The metal last is required for vulcanized shoe production.  It is perfect for short production runs, easy to recycle,  made of lightweight aluminum.  Cast aluminum is also very durable.

Cons:  Shape is not as accurate as wood or plastic. It is not so easy to keep clean. Quality can be suspect.  Variation between sizes must be watched. Rough surfaces can damage linings.

You can see how lasts are made Here.         You can download a last for 3D printing Here. 

the running shoe last how to measure a shoe last
The Shoe Last Chapter 13

To learn more about shoe last design, shoe last making, wood lasts, plastic and metal lasts check out chapter 13 in the book
How Shoes are Made.

Learn more about making shoes:

Footwear design book Free PFD Shoe Design Book DownloadDo you want to learn how big brands make shoes?  Now you can!  How Shoes are Made will show you how modern shoes come to life! More than just a tour through a sneaker factory and more than your average shoe making book!  From drawing shoe designs to sample development and footwear manufacturing, you will learn how it is all done. Written by veteran shoemaking pros, How Shoes are Made will give you a look inside the REAL world of shoe design, development, and mass production. 220 pages with over 400 color photos and drawings. 26 chapters explaining shoe design, footwear pattern making, sample development, footwear materials selection, upper stitching, outsole and tooling design, shoe lasts, shoe costing, quality inspections, starting you own shoe brand, and much more!  A must read for young shoe designers, sneaker heads, or any footwear fanatic! Over 2500 copies sold! Read in 60 Countries! See Preview Video On YouTube

Download Now! 

Print Edition Now Available!  

Table of Contents:

The Design Process, Shoe Development, Shoe Patterns, Shoe Specifications, Outsole Tooling, Development Process, Pre-Production, Material Preparation, Stitching Operations, Rubber Pressing, EVA Forming, The Assembly Line, The Shoe Last, Footwear Costing, Importing Shoes, Shoe Logo Design, Leather for Shoes, Textiles for Shoes ,Synthetics for Shoes,  Foam for Shoes, Know Your Footbeds, Material Suppliers, Shoe Designers Tools, Jobs in the Shoe Trade ,Quality Control, Starting a Shoe Company, Life at a Shoe Factory, Shoe Making Dictionary

If you want to learn more, check out our new books.

Print Editions and Instant Downloads Available Now!

E-Book edition 220 pages. PC and Mac compatible PDF file. Download Now!

E-Book edition 170 pages. PC and Mac compatible PDF file. Download Now!

Now enjoy the double download of two Sneaker Factory books.

Print Edition, 250 Pages with over 400 color photos and drawings.

Print Edition, 220 pages with over 400 color photos and drawings.

A must have for anyone serious about launching a new footwear company!

E-Book edition 170 pages. Profit margin and Size run calculators. Download Now!

Download Edition + Paper Pattern + Blue Prints and Spec sheets

Start-up Pack is all you need to get your own shoe business started.

Print Edition + Paper Pattern + Blue Prints and Spec sheets

A complete technical specification, drawings, blueprint, pattern and spec.

Computer cut shoe pattern for a classic jogger.  Factory Blue Print included.

Entire pattern size run for the Arris classic trainer, Men’s US 7-13 (Euro 39-47)

Shoe last measuring step. Measures last heel lift from 1cm to 11.5 cm.

24 inch tape specifically designed for measuring shoe lasts.

Ready to Print! Men's size 9 last. The .STL file can be scaled in X, Y and Z.

Great for checking leathers and synthetic materials. Features adjustable dial.

Beaked pincers with built in hammer face. For shoe lasting and sole nailing.

Try the first 3 chapters for Just $3 bucks! With discount code good of $5.00 off!

Great for DIY Shoemaking. This casual rubber outsole is durable, comfortable, and easy to work with.

Purchase