How to Make a Shoe Last

How to Make a Shoe Last

Yes, you can make a shoe last at home! In this article, we will review the basic techniques you can use to make a shoe last. If you have a custom shoe project in mind for yourself, or need a shoe last for a DIY or school project, you can use these techniques.

There are several ways that you can make a last for your shoe projects.
1.  Carve the shoe last from wood or foam.
2.  Build the last from stacked wood or cardboard.
3.  Make an Alginate™ foot casting in a box mold.
4.  Make a shoe last inside a foot form with plaster gauze.
5.  Use a 3D printer to make a shoe last.

Carve the shoe last from wood

How to make shoe last  If you have some woodworking skills, patience, and access to equipment, you can carve a custom last from wood. The wood carved last is the most traditional way to make a shoe last. Starting with a block of wood that is free of any knots or split grain, draw the side profile and bottom shape. Wood-SHoe_lastThen, using a band saw or hand tools, cut the general shape of the footwear last. From this point, use chisels, sanding machines, and files to refine the shape.
This process is very time-consuming. If you have access to CNC equipment at a MakerSpace or a school wood shop you may choose to do the rough cutting using the machinery and then finish by hand.

how to carve a wood shoe last
Here is an amazing video showing how you can cut and carve a shoe last.


Build a shoe last with stacked wood or cardboard

Build a shoe last with stacked cardboard Using stacked cardboard is an easy way to make a shoe last with only a hobby knife and cardboard scraps. This will take some time, but if you have a printer it is easy. Download the stacked file PDF here. It is simple to do. First print the pages, then glue them to cardboard and cut them out.

If you have access to a laser cutting machine you can use this machine to save time and make a very clean last. Once you have the cardboard stacked and glued together, a few coats of varnish or resin can harden the surface and make the cardboard last easier to handle.

Build a shoe last with Alginate™ cast in a box mold.

Alginate™ is a flexible casting material used in the dental and biomedical field. It is easy to use and non-toxic. To make an Alginate™ casting you will need about two pounds of the material. It’s easy to get Alginate for your shoe lasting project from Amazon. To make the last casting you will need a box, wood is best but you can also use cardboard. Alginate is water based so you need to be careful that your mold box does not turn into a soggy mess.  Preparation is easy but you are going to need a helper. A pair of rubber gloves are not required but will help you to reduce the mess.
Build a shoe last with Alginate™ Cast in a box mold. Build your foot casting box. Make the box fit close to your foot but make sure to leave an inch or 30mm around your foot, your helper will need this space to apply the Alginate.

To prepare you should apply Vaseline or another petroleum jelly all over your foot, this will make it easier for you to slide your foot out at the end.  For men – you must shave the hair off your foot! Removing your foot will be painful if you skip this step. A plastic bag can also be wrapped around your foot but I would not recommend this as it will make your casting wrinkled.

To apply the Alginate, first, pour some into the bottom of your box, then cover your foot. Alginate sets very quickly. In just a few minutes the Alginate will be firm. You can now gently start flexing your foot to remove it from the mold. Go slow and be careful not to tear the mold.
The top edge may tear but don’t worry.


Build a shoe last with Alginate™ Cast in a box mold.


Once you have the mold you can pour plaster or resin into the mold.  To remove the last you will need to cut away the Alginate.

After some hand finishing, you can use your foot casting to make your DIY shoe project.





Cast a shoe last in a mold made from plaster gauze.

Plaster_GauzePlaster gauze is another great way to make a casting of your foot.  You will need a helper for this project as it can get a bit messy. The process is simple. First, prepare your foot by shaving off the hair and then apply Vaseline petroleum jelly to stop the plaster from sticking.

Wet the plaster and apply to the foot,  you should be seated with only a little weight on your foot. Don’t wrap the plaster too high as getting the casting off can be a bit tricky.

Once the plaster is on, it will take a while to set up. You will feel some Plaster_gauze_last_castingheat but it’s not dangerous. When you feel the plaster getting firm it is time to remove the casting. You will need to carefully trim down the side of the plaster casting. A small pair of scissors with tape on the point can be used.

Go slow and trim just a little at a time until you can slip your foot out. It is a good idea to save a patch or two of the plaster gauze to make any repairs.

Once you have the mold you can pour resin into the mold.  To remove the last you will need to cut away the plaster casting.

After some hand finishing, you can use your foot casting to make your DIY shoe project.



Build a shoe last with a 3D printer

Build a shoe last with a 3D printerIf you have access to a decent sized 3D printer you can print this last full size in about 5 hours. We have a really slick MakerBot Model Z18 on hand so we tested the file.  We printed the sneaker last with 0% fill, 2 shells, and scaled to 275mm long for USA men’s size 9. With 0% fill the last is fragile but perfect for filling with expandable foam, casting resin, or plaster for a more durable last.
$4.99 USD Download Now!

Learn more about making shoes:

Footwear design book Free PFD Shoe Design Book Download जूते कैसे बनते हैंDo you want to learn how big brands make shoes?  Now you can!  How Shoes are Made will show you how modern shoes come to life! More than just a tour through a sneaker factory and more than your average shoe making book!  This is the perfect Shoe design a handbook for footwear designers.  From drawing shoe designs to sample development and footwear manufacturing, you will learn how it is all done. Written by veteran shoemaking pros, How Shoes are Made will give you a look inside the REAL world of shoe design, development, and mass production. 220 pages with over 400 color photos and drawings. 26 chapters explaining shoe design, footwear pattern making, sample development, footwear materials selection, upper stitching, outsole and tooling design, shoe lasts, shoe costing, quality inspections, pattern making and much more!  A must-read for young shoe designers, sneakerheads, or any footwear fanatic! Secure payments Visa, MasterCard & PayPal. Over 3500 copies sold! Read in over 60 countries! See Preview Video On YouTube

Download Now! 

Print Edition Now Available!  

Table of Contents:

The Design Process, Shoe Development, Shoe Patterns, Shoe Specifications, Outsole Tooling, Development Process, Pre-Production, Material Preparation, Stitching Operations, Rubber Pressing, EVA Forming, The Assembly Line, The Shoe Last, Footwear Costing, Importing Shoes, Shoe Logo Design, Leather for Shoes, Textiles for Shoes ,Synthetics for Shoes,  Foam for Shoes, Know Your Footbeds, Material Suppliers, Shoe Designers Tools, Jobs in the Shoe Trade ,Quality Control, Starting a Shoe Company, Life at a Shoe Factory, Shoe Making Dictionary

If you want to learn more, check out our new books.

Print Editions and Instant Downloads Available Now!

Shoemaking Books / Go to Shoemaking Tools

E-Book edition 220 pages. PC and Mac compatible PDF file. Download Now!

E-Book edition 195 pages. PC and Mac compatible PDF file. Download Now!

E-Book edition 170 pages. PC and Mac compatible PDF file. Download Now!

Print Edition, 250 Pages with over 400 color photos and drawings.

Print edition 330 color photos,  28 Chapters, 195 Pages order today!

Print Edition, 220 pages with over 400 color photos and drawings.

Shoe Designers

Two PFD E-books, paper pattern and Blue Print. Download Now!

Two softcover books, paper pattern and Blue Print. Free downloads included!

The triple download of all three Sneaker Factory publications.

Start-up your Own Shoe Company

E-Book edition 170 pages. Profit margin and Size run calculators. Download Now!

A must have for anyone serious about launching a new footwear company!

A must have for anyone serious about launching a new footwear company!

Shoemaking Tools

Entire pattern size run for the Arris classic trainer, Men’s US 7-13 (Euro 39-47)

Shoe last measuring step. Measures last heel lift from 1cm to 11.5 cm.

24 inch tape specifically designed for measuring shoe lasts.

A complete technical specification, drawings, blueprint, pattern and spec.

Great for checking leathers and synthetic materials. Features adjustable dial.

Beaked pincers with built in hammer face. For shoe lasting and sole nailing.

Ready to Print! Men's size 9 last. The .STL file can be scaled in X, Y and Z.

Try the first 3 chapters for Just $3 bucks! With discount code good of $5.00 off!

Great for DIY Shoemaking. This casual rubber outsole is durable, comfortable, and easy to work with.


Leave a Reply

Your email address will not be published. Required fields are marked *

Solve : *
16 ⁄ 4 =