How Adidas Makes Shoes
What is the process used to make Adidas Shoes? Most Adidas shoes are made by cold cement construction. Cold cement is the modern updated style of shoe construction and is the opposite of the classic high heat vulcanized shoe construction as found in Vans and Converse shoes.
Cold Cement shoe construction allows the use of modern lightweight plastic, foam, and mesh materials due to the low temperatures required for bonding the upper to the shoe sole. Every modern high performance athletic shoe manufactured by Adidas for running, basketball etc… is made by this cold cement process.
Every Adidas shoe from the Samba to the New Adidas Ultra Boost is made by the cold cement process. This is how Adidas makes all of its performance athletic shoes.
Cold Cement Shoe Assembly Process:
In the cold cement process the shoe upper can be prepared with the strobel bottom. For this running shoe the outsole covers the edge upper so a strobel bottom can be used to make the shoe lighter and more flexible.
The shoe upper is steamed to soften the materials and the last is inserted and pulled tight. Once the last is tight inside the upper a second lasting machine pulls the heel edge. Once the last is secured inside the upper and temporary shoes laces are pulled tight the upper is cooled to shrink the upper tight to the last.
The shoe may have a plastic or fabric part installed on top of the tongue to protect the surface from damage and drift during the lasting operations.
While the upper is being lasted, the sole unit is being prepared. In this case a rubber sheet sole is combined with the EVA foam cushioning component cemented inside. This is done in a separate process that’s called stock fitting.
Once the upper is lasted tightly and the outside unit is compete, the two pieces come together. The rubber sole unit will receive a coating of primer and cement. The outsole will get its own special primer designed for EVA and rubber. The shoe upper is also prepared with its own special primer and cement.
After the contact cement and primer has been completely dried in the heating tunnels the two pieces are joined together by hand. A skilled worker aligns the upper and outsole together then places the shoe in a hydraulic press.
The shoe will have 3 pressing operations, usually all done with one machine. A vertical press, toe and heel press, and side presses. This insures there is full contact between the upper and outsole. Once the shoe is pressed together it is often put in the cooling tunnel to set the glue.
After the cooling tunnel, a shoe de-lasting machine is used to push the last out of the shoe without wrinkling the upper.
Now the sneaker is complete. At this point you can insert the foot bed. The footbed may be molded EVA with a fabric cover or flat sheet cut foam. The flat die-cut foot bed is usually cemented inside the shoe, while molded footbeds are most often removable.
The new sneaker is ready for a final QC inspection, a quick check for any loose threads, cleaning, and packing.
Learn more about how Adidas and the other big brands make shoes in the book
How Shoes are Made.
Learn more about making shoes:Do you want to learn how big brands make shoes? Now you can! How Shoes are Made will show you how modern shoes come to life! More than just a tour through a sneaker factory and more than your average shoe making book! From drawing shoe designs to sample development and footwear manufacturing, you will learn how it is all done. Written by veteran shoemaking pros, How Shoes are Made will give you a look inside the REAL world of shoe design, development, and mass production. 220 pages with over 400 color photos and drawings. 26 chapters explaining shoe design, footwear pattern making, sample development, footwear materials selection, upper stitching, outsole and tooling design, shoe lasts, shoe costing, quality inspections, starting you own shoe brand, and much more! A must read for young shoe designers, sneaker heads, or any footwear fanatic! Over 2500 copies sold! Read in 60 Countries! See Preview Video On YouTube
Print Edition Now Available!
Table of Contents:The Design Process, Shoe Development, Shoe Patterns, Shoe Specifications, Outsole Tooling, Development Process, Pre-Production, Material Preparation, Stitching Operations, Rubber Pressing, EVA Forming, The Assembly Line, The Shoe Last, Footwear Costing, Importing Shoes, Shoe Logo Design, Leather for Shoes, Textiles for Shoes ,Synthetics for Shoes, Foam for Shoes, Know Your Footbeds, Material Suppliers, Shoe Designers Tools, Jobs in the Shoe Trade ,Quality Control, Starting a Shoe Company, Life at a Shoe Factory, Shoe Making Dictionary
If you want to learn more, check out our new books.
Print Editions and Instant Downloads Available Now!
E-Book edition 170 pages. PC and Mac compatible PDF file. Download Now!
E-Book edition 220 pages. PC and Mac compatible PDF file. Download Now!
Now enjoy the double download of two Sneaker Factory books.
Print Edition, 220 pages with over 400 color photos and drawings.
Print Edition, 250 Pages with over 400 color photos and drawings.
A must have for anyone serious about launching a new footwear company!
E-Book edition 170 pages. Profit margin and Size run calculators. Download Now!
Download Edition + Paper Pattern + Blue Prints and Spec sheets
Start-up Pack is all you need to get your own shoe business started.
Print Edition + Paper Pattern + Blue Prints and Spec sheets
A complete technical specification, drawings, blueprint, pattern and spec.
Computer cut shoe pattern for a classic jogger. Factory Blue Print included.
Entire pattern size run for the Arris classic trainer, Men’s US 7-13 (Euro 39-47)
24 inch tape specifically designed for measuring shoe lasts.
Ready to Print! Men's size 9 last. The .STL file can be scaled in X, Y and Z.
Great for checking leathers and synthetic materials. Features adjustable dial.
Beaked pincers with built in hammer face. For shoe lasting and sole nailing.